iPECS eMG80 - System Hold

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
137
I-Hold Recall Timer (PGM 180-Button 5)
Transfer Hold Recall Timer (PGM 180-Button 7)
SYSTEM DATA
Web Admin.
System Attributes Hold Preference
System Attributes Attendant Recall Timer, Exclusive Hold
Recall Timer, I-Hold Recall Timer, System Hold Recall
Timer, Transfer Recall Timer
Related Features
 Call Transfer, Line
 Hold Preference
 Hold Recall
 System Hold
Hardware
2.43.5 System Hold
Description
Outside Lines may be placed in a waiting state such that other stations in the system are able to
access the Line. Stations must have access to the Line in the system database to access the
held call.
If the call remains on hold at expiration of the System Hold Recall Timer, normal Hold Recall will
apply.
Operation
iPECS IP & LDP Phones
1. Press the [HOLD/SAVE] button.
To place a call on System Hold
1. Lift the handset or press the [SPEAKER] button.
To access a call from System Hold
2. Press the line button.
Or,
1. Lift the handset or press the [SPEAKER] button.
2. Dial “8#”, Access Held Individual CO/IP code.
3. Dial the line number.