iPECS eMG80 - Net Call Camp-On (Call Offer)

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
259
Net CO Line Attributes
Net Numbering Plan
Related Features
 Call Transfer, Station
 Net Call Transfer
Hardware
2.82.2.5 Net Call Camp-On (Call Offer)
Description
When calling to a networked station that is busy, you may camp a call on to the called station.
The called station receives a camp-on tone and the [Hold/Save] button LED will flash. Network
Camp-on operation is the same as system Camp-on and is subject to the same conditions.
From a network perspective, iPECS system employs H.450 Call Offer protocol to provide camp-
on capabilities.
Operation
iPECS IP & LDP Phones
1. Dial a busy station number and receive busy tone.
To activate Call Offer
2. Press the [CAMP ON] button or “*”.
3. The busy station receives off-hook muted ring.
4. The calling station hears a ring-back tone.
1. Press the flashing CO line button while receiving muted ring.
To answer the Call Offer
Or,
1. Hang-up and receive normal ring.
2. Lift the handset or press the [SPEAKER] button.
Conditions
1. Call Offer is only applied to a station that is in talking state.
2. If the busy party is in a conference or paging, Call offer is not available.
3. The system does not support the path reservation mode defined in the QSIG
specification.
Programming
Keyset Admin.
SYSTEM
Networking Basic Attribute (PGM 320)