iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
260
Networking CO Line Attribute (PGM 322)
Network Numbering Plan Table (PGM 324)
Network Feature Code Table (PGM 325)
Web Admin.
Related Features
Call Waiting/Camp-On
Hardware
2.82.2.6 Net Conference
Description
You can join stations and outside Lines from other networked systems to a conference call with
other stations or CO lines.
Operation
iPECS IP & LDP Phones
1. Establish the first call.
To establish an ad-hoc conference
2. Press the [CONF] button. The LED will light, the connected party is placed on exclusive
hold and you receive dial tone.
3. Place the second call.
4. When connected, press [CONF], the new call is placed on exclusive hold.
5. Repeat Steps 3 and 4 above to add additional conference parties.
6. Press the [CONF] button to establish conference.
1. Press the [HOLD/SAVE] button, the [CONF] button LED will flash.
To place a conference on hold
1. Press the flashing [CONF] button, all parties reconnected.
To retrieve held conference
SLT
1. Establish the first call.
To establish an 3-party conference
2. Momentarily press the hook-switch, the connected party is placed on exclusive hold and
you receive dial tone.
3. Place the second call.
4. When connected, momentarily press hook-switch twice in 2 seconds to connect all parties.
To Next Page
Loading...
