iPECS eMG80 - Call Forward from VM

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
153
2.47.3.3 Call Forward from VM
Description
If you are at a remote location, you can activate or deactivate Unconditional Call Forward from
the integrated Voice Mail. Pressing “7” at the main VM menu will return the "Mailbox Set Forward"
prompt.
Operation
1. Press “7”, for Mailbox set forward, the “Mailbox Set Forward” prompt is received.
To activate Call Forward while in the VM
2. Dial “1” and receive the “Forward” prompt (“Please enter the number to forward to ...").
3. Dial Station Number as follows:
− To forward to another station, dial the station number.
− To forward calls Off net, dial “*” and enter station speed number. If the station Speed
bin is valid, confirmation announcement “forwarded to station (‘xxx’)” or “forwarded to
speed bin number (yyyy)” is played.
1. Press “7”, for Mailbox set forward, the “Mail Box Set Forward” prompt is received.
To deactivate Call Forward
2. Dial “2” and receive the “Station forwarding is canceled” prompt.
1. Dial “9” and receive the “Mailbox Settings” prompt.
To return to the Main menu
Conditions
1. Remote user dialing is subject to the inter-digit timer. If you do not input a response to
the VM prompts in the inter-digit time, the call is released.
2. The ability to activate Unconditional Call Forward from your Mailbox is only available
when the Mailbox is accessed from a remote location.
Programming
Related Features
 Message Storage
 Message Retrieval
 Remote Message Retrieval
 Message Retrieval Options
Hardware