iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
136
2.43.4 Exclusive Hold
Description
Outside lines may be placed in a waiting state such that other stations in the system are unable to
access the line. Only the station placing the line on Exclusive hold can access the held line.
If the call remains on hold at expiration of the Exclusive Hold Recall Timer, normal Hold Recall
will apply.
Operation
iPECS IP & LDP Phones
1. Press the [HOLD/SAVE] button twice.
To place a call on Exclusive Hold
1. Lift the handset or press the [SPEAKER] button.
To access a call on Exclusive Hold from the holding station
2. Press the held line button.
Or,
1. Dial “8#”, Access Held Individual CO/IP code.
2. Dial the line number.
SLT
1. Momentarily press the hook-switch.
To place a call on Exclusive Hold
1. Lift the handset.
To access a call on Exclusive Hold from the holding SLT
2. Dial “8#”, Access Held Individual CO/IP code.
3. Dial the line number.
Conditions
1. When an outside line is placed on Exclusive Hold, the button LED will flash at 120 ipm
at the holding station and will be On at all other stations.
2. All Transferred outside calls are placed on Exclusive Hold for the receiving station.
3. The LED of {LOOP} and {POOL} buttons will display the active outside line status.
Programming
Keyset Admin.
Hold Preference (PGM 160-Button 7)
Attendant Recall Timer (PGM 180-Button 1)
Exclusive Hold Recall Timer (PGM 180-Button 4)
To Next Page
Loading...
