iPECS eMG80 - IP FAX Relay, T.38 Support

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
164
Direct Transfer to Mailbox (PGM 120-Button 6)
Station Call Forward Timer (PGM 123)
SYSTEM
Call Forward No Answer Timer (PGM 181-Button 1)
VSF User Record Timer (PGM181-Button 3)
VSF Valid User Message Timer (PGM 181-Button 4)
STATION DATA
Web Admin.
VM Attributes  VSF Access
Preset Call Forward Transfer to Mail Box
Station Timer

Station Forward No Answer Timer
SYSTEM DATA System Timers Call Forward No Answer Timer,
VSF User Maximum Record Timer, VSF Valid User
Message Timer
Related Features
 Call Forward
 Station Message Wait/Call Back
 Integrated AA/VM Overview
 Call Transfer, Voice Mail
Hardware
2.47.3.12 Outbound Message Notification
Description
When a new message is received, the system will check the new message notification settings.
If configured to notify your Mobile extension, the system will place a call to your mobile phone and,
when answered, play the station number prompt followed by the new message prompt, “You
have xx new messages.” The new message prompt indicates the number of unheard messages.
After the new message prompt you will be prompted to enter your password, which will access
your mailbox. You must listen to the new messages to confirm the notification.
If you take no action within the CCR Inter-digit timer, do not answer, the system receives busy or
you hang-up, the call is disconnected and the system will retry the call after the retry timer expires.
The system will attempt to complete the notification until you listen to the message or the number
of attempts reaches the DISA Retry counter.
Operation
1. Answer Notification call and receive the New messages and password prompt.
To receive and confirm the notification