iPECS eMG80 - Auto Called Number Redial (ACNR)

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
34
SYSTEM DATA Serial Port Selections ACD Package Print
System Attributes ACD Manager Print (Output ACD Event
Message)
Related Features
 Station Groups
Hardware
2.7.9 Group Mail Box
Description
A Voice mailbox can be associated with a Station Group. Calls to the group are assigned to
overflow and can be otherwise re-routed to the Station Group Mail box where the caller can leave
a voice message.
Messages are retrieved in the same manner as normal voice messages employing the Station
Group number as the station number and the defined Group Mailbox Password. Messages can
be retrieved only if a {GROUP MAILBOX} Flex button is assigned to the station.
Operation
Agent iPECS IP & LDP Phone
[TRANS/PGM] + {FLEX} + VSF-VM Station Group + Group Message Wait Station +
[HOLD/SAVE]
To assign a {GROUP MAILBOX} Flex button
1. Lift the handset or press the [SPEAKER] button.
To retrieve Station Group Voice Mail
2. Press the {GROUP MAILBOX} button to receive the “Password” prompt.
3. Dial the ACD Group number and Group Mailbox Password. The “Number of Messages”
prompt followed by Voice Mail instruction prompts are played.
4. Dial the desired option from the Voice Mail prompt.
5. At completion of the session, hang-up to return to idle.
1. After the Mailbox Greeting and beep, leave the message.
To leave a voice message
2. Hang up to quit recording or dial “*” for further options.
Conditions
1. The System Administrator or Supervisor may change the Group Mailbox Password.