iPECS eMG80 - System; 8-Digit Station Numbering Plan

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
3
2. SYSTEM
2.1 8-Digit Station Numbering Plan
Description
The system supports Station Numbering Plans from two to eight digits. The Station number
consists of a Prefix digit string and a suffix called “Add Digit”. A Prefix digit string can be up to six
(6) digits that do not conflict with the system Flexible Numbering Plan used for feature codes. The
Add Digit defines the number of digits from the Station Number that are added as the suffix to the
Prefix digits to form the Station Number. The Add Digits can be 2 digits in length using the right
most digits of the Station Number and must uniquely identify the station.
Operation
System
Conditions
Operation of the 8-digit Station Numbering Plan is automatic when configured.
1. The system employs the complete Station number, 2 to 8 digits, when sending
messages to an external device such as an adjunct Voice Mail and TAPI device such
as ez-Attendant. It is the responsibility of the 3
rd
party software to support the defined
Station Numbering Plan.
2. When using Keyset Admin to configure the 8-Digit Table, Prefix Usage must be
enabled in the System ID PGM 100 (Flex button 5).
3. The 8-digit numbering is configured in the 8-Digit Table (PGM 238).
Programming
System ID
Keyset Admin.
Prefix Usage (PGM 100 – Flex button 5)
8-Digit Table (PGM 238)
SYSTEM ID &
NUMBERING PLANS
Web Admin.
8 Digit Extension Table8 Digit String, Add Digit
Related Features
 Flexible Station Number
Hardware