iPECS eMG80 - Net Call Identification Service

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
257
Networking CO Line Attribute (PGM 322)
Network Numbering Plan Table (PGM 324)
Network Feature Code Table (PGM 325)
NETWORKING DATA
Web Admin.
Net Basic Attributes
Net Supplementary AttributesNet Transfer Mode, Net
Trans Recall timer
Net CO Line Attributes
Net Numbering Plan
Related Features
 Call Transfer, Station
 Speed Dial
Hardware
2.82.2.3 Net Call Identification Service
Description
When Calling Name Identification Presentation (CNIP) and Connected Name Identification
Presentation (CONP) are enabled, the station name is provided as the caller identification
received and displayed at a station receiving a call from a Networked station.
Operation
Conditions
Operation of the Station Name Display is automatic when configured.
1. The Station Name must be defined in the system of the calling station.
Programming
STATION DATA
Web Admin.
Station Name Display
NETWORKING DATA
Net Basic Attributes

Net CNIP Enable, Net CONP Enable
Related Features
 Net Intercom Call
 Net Call Transfer
Hardware