iPECS eMG80 - Intrusion

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
428
6.17 Intrusion
Description
An Attendant can intrude upon an active station conversation. When the Attendant intrudes an
Intrusion Tone is provided, if assigned, and a conference is established between the Attendant,
station, and the connected party.
Intrusion can only be activated using an {ATD INTRUSION} button.
Operation
Attendant
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “86” + [HOLD/SAVE]
To assign an {ATD INTRUSION} button
1. Press {ATD INTRUSION} button, Intrusion Warning Tone is provided to the busy station
and the Attendant join the conference to the call.
To activate attendant intrusion while receiving busy on an Intercom call
Conditions
1. If an Attendant or Secretary of an Executive/Secretary pair presses the {ATD
INTRUSION} button while receiving DND tone, the system will activate DND Override.
2. The conditions of the Conference feature apply.
3. If ‘Privacy’ option is ON, then Attendant can’t intrude to the station.
Programming
Keyset Admin.
STATION
Override Privilege (PGM 113-Button 4)
SYSTEM
Automatic Privacy (PGM 161-Button 3)
Privacy Warning Tone (PGM 161-Button 4)
STATION DATA
Web Admin.
Common Attributes

Override Privilege
SYSTEM DATA System Attributes Automatic Privacy, Privacy Warning
Tone
Related Features
Hardware
 iPECS IP or LDP Multi-button Phone, a 24-button phone is recommended