iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
82
Related Features
Multi-Party Conference
Automatic Speaker Select
Hold Recall
Hardware
2.22.4 Multi-Party Conference
Description
The system allows multiple internal and external parties to be connected on a call, conference.
In case of eMG, you can join a maximum of thirteen (13) parties can be in a conference with a
maximum of two such conferences simultaneously. There is no limit on the number of 3-party
conferences.
In case of UCP, an unlimited number of 3-party conferences can be established by iPECS
Phones. In addition, up to 32 parties with the g.711or g.729 codec and 24 parties with the g.722
or g.723 codec can be connected to a single voice conference using MCIM (Multi-party
Conference Interface Module).
The MCIM of UCP will support any combination of parties and conferences to the maximum total
number of parties in conference. Multiple MCIMs are installed to support multiple multi-party
conferences with a maximum of 32 parties in any single conference.
You can place a Conference on hold, allowing you to accomplish other tasks while permitting the
other parties to continue to converse.
Operation
iPECS IP & LDP Phones
1. Establish the first call.
To establish an ad-hoc conference
2. Press the [CONF] button. The LED will light, the connected party is placed on exclusive
hold and you receive dial tone.
3. Place the second call.
4. When connected, press [CONF], the new call is placed on exclusive hold.
5. Repeat Steps 3 and 4 above to add additional conference parties.
6. Press the [CONF] button to establish conference.
1. Press the [HOLD/SAVE] button, the [CONF] button LED will flash.
To place a conference on hold
1. Press the flashing [CONF] button, all parties reconnected.
To retrieve held conference
To Next Page
Loading...
