iPECS eMG80 - Call Pick-Up

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
51
2.11 Auto Service Mode Control
Description
The service mode defines different ring assignments, COS (Class of Service) and answering
privileges for the external network connections and Stations in the system based on the time of
day. The service mode can be controlled automatically through definitions in the Auto Ring Mode
Selection Table (Weekly Time table), which defines the time of day for the Day, Night and Timed
shift modes for each day of the week.
The Attendant may change the service mode selection from automatic to manual selecting the
Day, Night, timed or Scenario mode.
Operation
System
Conditions
Operation of this feature is automatic.
Programming
Keyset Admin.
STATION
Station COS (Class of Service) (PGM 116)
CO/IP CO/IP Ring Assignment (PGM 144)
CO Line COS (Class of Service) (PGM 141-Button 2)
SYSTEM DISA COS (Class of Service) (PGM 166)
External Control Contact (PGM 168)
PABX Access Codes (PGM 172)
LD Call Digit Count (PGM 177-Button 4)
Long Distance Code (PGM 177-Button 19)
TABLES Toll Exception Tables (PGM 224)
Authorization Codes Table (PGM 227)
Weekly Time Table (PGM 233)
STATION DATA
Web Admin.
Station COS
CO LINE DATA CO/IP Ring Assignment
Common Attributes

CO Line COS (Class of Service)
SYSTEM DATA DISA COS (Class of Service)
External Control Contact
PBX Access Codes
Attendant Assignment
SMDR Attributes  Long Distance Call Digit Counter, Long
Distance Code
TABLES DATA
Toll Exception Table