iPECS eMG80 - Intercom Call Hold

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
298
3.4 Intercom Call Hold
Description
While on an active Intercom (ICM) call, using an iPECS IP or LDP Phone you can place the call
on hold. The held station will receive the assigned Music-on-Hold. The call is placed on Exclusive
Hold and recalls you after expiration of the Exclusive Hold Recall Timer.
An [ICM] button must be assigned to the iPECS IP or LDP Phone.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “87” + [HOLD/SAVE]
To assign an [Intercom] button
1. Press the [HOLD/SAVE] button, the [ICM] button LED will flash at the exclusive hold rate.
ICM dial tone is received.
To place an active ICM call on hold
1. Press the [ICM] button or the {DSS/BLF} button associated with the held station, the [ICM]
button LED illuminate and the ICM call connected.
To retrieve the held ICM call
Conditions
1. Multi-intercom call can be placed on hold at station. Press the [ICM], [HOLD] button or
the {DSS/BLF} button associated with the held station, the [ICM] button LED illuminate
and the ICM call connected by FIFO.
Programming
Related Features
 MOH (Music-On-Hold)
 Intercom Call (ICM Call)
 Exclusive Hold
 Hold Recall
Hardware
 iPECS IP or LDP Phone