iPECS eMG80 - CO Line Release Guard Time

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
327
4.4 CO Line Release Guard Time
Description
To assure that the service provider’s switching equipment has sufficient time to restore to the idle
condition, the system will hold analog CO Lines in a busy state after release of the Line. The time
between the disconnect and when the system changes the CO Line status from busy to idle is the
CO Line Release Guard time.
Operation
System
Conditions
Operation of this feature is automatic.
Programming
Keyset Admin.
SYSTEM
CO Release Guard Timer (PGM 180-Button 16)
SYSTEM DATA
Web Admin.
System Timers

CO Release Guard Timer
Related Features
Hardware