iPECS eMG80 - Outside Line Ring Assignment

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
356
4.20 Outside Line Ring Assignment
Description
Each station in the system can be programmed to provide an audible signal when the system
detects an incoming call on specified Lines. Separate ring assignments are made for Day, Night
and Timed Ring operation mode. In addition, the audible signal at the station can be delayed by 1
to 9 ring cycles allowing other stations to answer the call first.
Operation
System
Conditions
Operation of this feature is automatic.
1. Separate assignments are made for stations to ring in the Day, Night and/or Timed
Ring mode.
2. A busy station receives muted ring or Call Waiting tones as appropriate for the station’s
Off-hook ring assignment.
3. The system Ring mode can be selected manually by the Attendant or automatically. In
the Automatic mode, Day/Night selection is determined based on the Automatic Ring
Mode Selection table.
4. The LCD of the Attendant station will display Night and Timed Ring Mode and the
[DND] button LED will flash.
5. If an outside Line is not assigned to ring at any station, incoming calls on the outside
line will ring the first available Attendant.
Programming
Keyset Admin.
CO/IP
CO Ring Assignment (PGM 144)
TABLES
Weekly Time Table (PGM 233)
CO LINE DATA
Web Admin.
CO/IP Ring Assignment
TABLES DATA
Auto Ring Mode Table
Related Features
 Day/Night/Timed/Scenario Ring Mode
 Auto Service Mode Control
 Off-Hook Signaling
Hardware