EasyManua.ls Logo

iPECS eMG80 - SLT Message Wait Indication

iPECS eMG80
467 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
423
6.13 DND Override
Description
A station in the DND generally cannot receive an incoming call. The Attendant and the Secretary
station of an Executive/Secretary pair however may override the DND status to signal the station
of an awaiting call. A Flex button assigned for Intrusion is required.
Operation
Attendant
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “86” + [HOLD/SAVE]
To assign a flexible button as a {ATD INTRUSION} button
1. Press the {ATD INTRUSION} button, the call signals at DND station.
To activate DND Override while receiving DND tone
Conditions
1. An Attendant may use Override to transfer an outside call to a station in DND.
Programming
Keyset Admin.
SYSTEM
Attendant Assignment (PGM 164)
SYSTEM DATA
Web Admin.
Attendant Assignment
Related Features
Intrusion
DND (Do Not Disturb)
Executive/Secretary Forward
Hardware
iPECS IP or LDP Multi-button Phone, a 24-button phone is recommended

Table of Contents

Other manuals for iPECS eMG80

Related product manuals