iPECS eMG80 - Mark a Message as Private

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
155
2. The E-mail address for the System and the station are defined under the Web Admin.
3. To attach the Voice message to the E-mail notification, the Attach Message option
(PGM 111 – Button 24) must enabled.
4. The “Sender E-Mail information (system E-mail account) is assigned in both the Station
and System Data areas. If both are assigned, the Station assignment is used.
Programming
Keyset Admin.
STATION
SMTP Mail Server Address (PGM113 – Button 18)
Receiver Mail Address (PGM113 – Button 19)
SMTP Mail Server ID (PGM113 – Button 23)
SMTP Mail Server P/W(PGM113 – Button24-1)
Delete Message After Add (PGM113 – Button24-5)
SMTP Security (PGM113 – Button24-12)
SMTP Port (PGM113 – Button24-13)
Sender Mail Address (PGM113 – Button24-14)
BOARD
VSF Sender Mail Address (PGM 132-Button 6)
SYSTEM
VSF SMTP Port (PGM113 – Button24-13)
STATIONDATA
Web Admin.
VM Attributes VSF MSG – SMTP Mail Server Address,
VSF MSG –Receiver Mail Address, VSF MSG –SMTP Mail
Server ID, VSF MSG –SMTP Mail Server Password, VSF
MSG – Attach Message, VSF MSG –Delete Message, VSF
MSG –SMTP Security, VSF MSG –SMTP Port, VSF MSG –
Sender Mail Address
Related Features
 Integrated Auto Attendant/Voice Mail
Hardware
2.47.3.6 Mark a Message as Private
Description
When you send or reply a message, you can mark the message as Private so that the receiver
cannot forward the message.
Operation
1. After identifying the receiver, you will receive the send message options prompt.
To mark a message as private