iPECS eMG80 - Group Call Pick-Up

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
65
Programming
Keyset Admin
SYSTEM
.
Ringing Line Preference Priority (PGM 173)
SYSTEM DATA
Web Admin.
RLP (Ringing Line Preference) Priority
Related Features
 Intercom Signaling Mode
 Ringing Line Preference
 Group Call Pick-Up
 Private Line
Hardware
2.18.2 Group Call Pick-Up
Description
You can answer (“Pick-Up”) incoming and transferred intercom and outside calls ringing at
another station in the same Station group. All ringing calls, except Private Line calls, queue
Callbacks and recalls from hold, are subject to Pick-up by other stations in the same group.
iPECS IP and LDP Phone users may assign a Flex button as a {Group Call Pick-Up} button.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + “**” + [HOLD/SAVE]
To assign a {Group Call Pick-Up} button
1. Lift the handset or press [SPEAKER] button.
To Pick-up a call ringing at another station
2. Dial “**”, the Group Call Pick-up feature code.
Or,
1. Press the {Group Call Pick-Up} button.
SLT
1. Lift the handset.
To Pick-up a call ringing at another station
2. Dial “**”, the Group Call Pick-up code.