iPECS eMG80 - Remote Control from Mobile Phone

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
215
2.73 Remote Control from Mobile Phone
Description
In addition to the call features available to your Mobile phone, you can control certain settings
through your Mobile phone. The Mobile has access to the Remote Control menu shown below.
1: Activate Mobile extension
2: Deactivate Mobile extension
3: Unconditional Forward to VM group
4: Cancel Fwd to VM group
5: ACD Agent Off-Duty
6: ACD Agent On-Duty
7: Callback to Mobile extension
8: Turn On CCR Temporary Announcement – [8 + CCR table number]
9: Turn Off CCR Temporary Announcement – [9 + CCR table number]
A System announcement can be recorded and configured to play when you enter the Remote
Mobile Extension Code. The announcement can be used to list the Remote Control Menu.
Operation
Mobile Phone
1. Call your system DID number.
To use the Remote Control Menu
2. Upon answer, enter “*580”, the Remote Mobile Extension Control code.
3. Dial the desired menu, dial tone is returned as confirmation.
Conditions
1. For proper operation, your phone must be allowed to Program the Mobile Extension
parameters, permitted Call Forward and access to the integrated Voice Mail must be
enabled.
2. Selecting ACD Agent Off-Duty will place you Off-duty with Reason code 1.
3. If you select Call Back from the Remote Menu, the call will be disconnected after the
confirmation tone then the system calls the mobile extension.
Programming
Keyset Admin
NUMBERING PLAN
.
Remote MEX Control (PGM109-Button 16)
STATION Call Forward (PGM 111-Button 2)
VSF Access (PGM 113 Button 2)
TABLES Mobile PGM Authority (PGM 236-Button 1)
Announce (PGM 236-Button 13)