iPECS eMG80 - DND (Do Not Disturb)

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
110
2.34 DND (Do Not Disturb)
Description
You can activate DND for a phone to prevent incoming calls from ringing at the station. This can
be useful, for example, when you are in a meeting or busy. DND will also block page
announcements.
Operation
iPECS IP & LDP Phones
1. Press the [DND] button, the [DND] button LED illuminates.
To activate DND
1. Press the [DND] button, the [DND] button LED extinguishes.
To remove DND
SLT
1. Dial “*553”, the DND feature code; stutter dial tone is received.
To activate DND
1. Dial “*553”, the DND feature code, dial tone is received.
To remove DND
Conditions
1. A station will receive error tone if not allowed access to DND.
2. If DND is allowed, pressing the [DND] button while ringing will activate One-Time DND.
3. Only the Secretary of and Executive/Secretary Pair or an Attendant may override DND
at the Executive’s station.
4. An Attendant may cancel DND for other stations.
5. DND service is not available to Attendants.
6. Recalls for outside calls will override the DND feature.
7. A station in DND is out-of-service for all incoming calls including Station Group calls.
8. A station in DND is bypassed by calls forwarded to the Station. If the last Station in a
Call Forward chain is in DND, the call will ring to the previous Station in the chain.
9. When calling a Station in DND, an iPECS IP or LDP Phone display will indicate the
DND status.
Programming
Keyset Admin.
STATION
DND (PGM 111-Button 3)
STATION DATA
Web Admin.
Common Attributes

DND