iPECS eMG80 - Call Transfer, Station

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
70
the outgoing call is disconnected and the original call is connected to your phone.
Programming
Keyset Admin.
STATION
Off Net Forward (PGM 111-Button 14)
SYSTEM Transfer Recall Timer (PGM 180-Button 7)
Off Net Prompt Usage (PGM 160-Button 11)
CO to CO UC Timer Extension (PGM 160-Button 12)
Unsupervised Conference Timer (PGM 182-Button 5)
STATION DATA
Web Admin.
Common Attributes

Off-Net Forward
SYSTEM DATA System Attributes Off-Net Prompt Usage, CO to CO
Unsupervised Conference Time Extension
System Timers Unsupervised Conference Timer, Transfer
Recall Timer
Related Features
 Hold Recall
 Call Transfer, Station
 Unsupervised Conference
Hardware
2.20.2 Call Transfer, Station
Description
After answering an outside call, you can send the call to another station in the iPECS system.
Calls can be transferred announcing the call (screened) or without an announcement
(unscreened).
When a call is transferred, the Transfer Recall Timer is initiated. If the timer expires before the call
is answered, the Hold Recall process is initiated.
A Flex button on iPECS IP and LDP Phones can be assigned for the DSS/BLF (Direct station
Selection/Busy Lamp Field) function, which allows One-button Transfer.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + Station Number + [HOLD/SAVE]
To assign a {DSS/BLF} button