iPECS eMG80 - Outside Line Name Display

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
381
5.16 Outside Line Name Display
Description
When you receive or place and outside call, the Line number is displayed in the LCD. If the Line
is assigned a name and Name display is enabled, the Line name is displayed instead of the
number.
Operation
iPECS IP & LDP Phones
1. Press the {LINE} button, or dial a Line/Group access code, LCD displays the Line name.
To display the Line name
Conditions
1. Each outside Line is assigned a name of up to 12 characters in the system database.
Programming
Keyset Admin.
CO/IP CO Line Name Display (PGM 142-Button 1)
CO Line Name Assign (PGM 142-Button 2)
CO LINE DATA
Web Admin.
Common Attributes CO Name Assign, CO/IP Name
Display
Related Features
Hardware
 iPECS IP or LDP Phone w/Display