iPECS eMG80 - IP Bridge Mode

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
163
 Remote Message Retrieval
 Voice Mailbox Settings
 Class of Service
Hardware
2.47.3.11 Message Storage
Description
When you activate Call Forward to the integrated Voice Mail, calls are transferred to your mailbox
or recall the Auto Attendant, the call is handled by the iPECS Voice Mail application. The caller
connects to your User Greeting followed by beep tone to notify the caller to leave a message.
The caller can record a message and hang-up or dial “*” for further options. At disconnect, the VM
application stores the message in your Voice Mailbox and activates the Message Waiting
indication at your station.
Operation
Remote Caller
1. State you message.
To leave a voice message after Greeting and beep
2. Hang up to quit recording or dial “*” for further options.
Conditions
1. Two timers are provided to control Voice Message duration. The Valid User Message
Timer establishes the minimum Voice Message duration. Voice Messages shorter than
this timer are not stored. The User Record Timer establishes the maximum Voice
Message duration. When the User Record Timer expires while recording a Voice
Message, confirmation tone is heard and the message is saved for destination station.
2. If all the AA/VM channels are in use, Ring Back tone is provided until a channel is
available.
3. All stations including a SLT can leave and receive voice messages.
4. Individual User Greetings and Voice Mails are protected from loss of AC power.
5. With the optional second Voice Store Forward Gateway, System announcement
should be recorded in both the main and second gateway. Also, each station and
Line Voice Mailbox should be associated with only one of the gateways.
Programming
Keyset Admin.
STATION
VSF Access (PGM 113-Button 2)