iPECS eMG80 - Background Music (BGM)

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
349
Related Features
 ISDN Supplementary Services
Hardware
 ISDN Line
 iPECS IP or LDP Phone
4.15.2 ISDN Malicious Call ID Request
Description
When the ISDN supports the Malicious Caller Id supplementary service, iPECS can request the
Calling Line ID (CLID) from the ISDN. The CLID is saved and output in the SMDR call record.
Malicious Caller Id is activated during an ISDN call and requires a {MCID REQUEST} Flex button
to access the feature.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + “*0” + [HOLD/SAVE]
To program an {MCID REQUEST} button
1. Press the {MCID REQUEST} button; the CLID is output in the SMDR.
To request MCID, while on an incoming ISDN call
Conditions
1. The ISDN must support the Malicious Caller Id Supplementary Service as defined by
the EN300-130 standard protocol.
2. If the MCID request is successful, the SMDR call record will include the CLID returned
from the ISDN and the characters “MT”. If the request fails, the characters “MF” are
included in the record.
3. If the system is programmed to save SMDR records, the MCID is stored in the system
memory as part of the call record.
Programming
Keyset Admin.
CO/IP
MCID Request (PGM 109-Button 1)
SYSTEM
SMDR Save (PGM 177-Button 1)
SYSTEM ID &
NUMBERING PLANS
Web Admin.
MCID Request