iPECS eMG80 - Green Power Save for eMG

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
117
2.36.4 Emergency Mailbox
Description
When a station makes an Emergency call or the Threat History button pressed, the call can be
recorded. If a station number is assigned as the Emergency Mailbox Station in System Attributes,
the emergency call will be recorded to built-in Mailbox of the station.
All stations with an {Emergency Mailbox} button are notified of the recording and can access the
Mailbox using the button.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + Built-in VM Group number + Station Number + [HOLD/SAVE]]
To assign a {Emergency Mailbox} button
1. Press the flashing {Emergency Mailbox} button
To listen to the Emergency Mailbox recording
2. Follow the normal Voice Mail procedures to listen to the Mailbox recordings.
Conditions
1. VSF must be installed and the VSF VM Station Group assigned in the system for
recording to the Emergency Mailbox Station.
Programming
SYSTEM DATA
Web Admin.
System Attributes Emergency Mailbox Station
Related Features
Hardware