iPECS eMG80 - Outside Line Queuing

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
189
2.57 Mobile Extension
Description
Your mobile phone may be registered to a station allowing the mobile phone to place and receive
calls through the system. DID calls are sent to your iPECS IP or LDP Phone and your registered
mobile phone simultaneously. If the mobile phone is paired with a Station group station, Station
group calls routed to the station can also ring to your mobile phone.
From your mobile phone you may access the facilities of the iPECS to place internal and external
calls as well as activate and access features. To access system facilities and resources, you call
your DID number from your mobile. When the call is received, the system matches the Calling
Line ID (CLI) to the mobile phone and provides you with system dial tone.
You may be permitted to register and activate a mobile phone for the Mobile Extension feature.
Operation
iPECS IP LDP Phones
[TRANS/PGM] + {FLEX} + [TRANS/PGM]+ “37” + [HOLD/SAVE]
To assign a Flex button to Register a Mobile
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “38” + [HOLD/SAVE]
To assign a Flex button to activate Mobile Extension
1. Press the [TRANS/PGM] button.
To register the mobile phone number
2. Dial “37”.
3. Dial the mobile phone number.
4. Press the [HOLD/SAVE] button.
1. Press the [TRANS/PGM] button.
To activate a registered mobile phone from the user’s station
2. Dial “38”.
3. Dial digit “1” to activate, “0” to deactivate.
4. Press the [HOLD/SAVE] button.
1. Dial the DID number of your station, the system will check the CLI, answer the call and you
receive internal dial tone.
To place a call from the mobile extension using the iPECS
2. Place an internal or external iPECS call as normal.
1. Dial “*” while on the iPECS call.
To Transfer a call your mobile received from iPECS
2. Dial the desired station, the call is transferred and the mobile phone returns to idle.