iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
188
2. When the outside Line used for the original call is busy, the system will select an idle
Line from the same Line group to place the call.
3. Using Last Number Redial will cancel Automatic Called Number Redial if active.
4. Manually dialing a Flash during an outgoing call will cause only those digits dialed after
the Flash to be stored in the LNR buffer.
Programming
Related Features
Save Number Redial (SNR)
Station Speed Dial
System Speed Dial
Hardware
To Next Page
Loading...
