iPECS eMG80 - Message Retrieval Options

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
161
Programming
Keyset Admin.
STATION
Retrieve Message Order (PGM 113-Button 13)
Auto save new message (PGM 161-Button 24-11)
STATION DATA
Web Admin.
VM Attributes

Retrieve MSG Method
SYSTEM DATA
System Attributes

Auto Save New Message
Related Features
 Message Retrieval Options
 Remote Message Retrieval
 Multiple Voice Mailbox Support
Hardware
2.47.3.10 Message Retrieval Options
Description
You may dial the digit 9 to receive the “VM long Options” prompt while in the Voice Mailbox,
including during or after a voice message or system prompt except when an option has been
selected that requires user dialing. The later may occur when you selects Message Retrieval
Option 1/2 (Play New/Saved Message), 7 (Cancel or Forward message, for Remote Access Only)
or 8 (Mail Box settings). The “VM long Options” prompt is:
"To play new messages, press one, to play saved messages, press two, to set station forwarding,
press seven (This option is available only for remote access), to set greeting or password, press
eight, to disconnect, press pound, Press 0 for the operator, Press nine to hear this message
again."
The integrated Voice Mail will respond to incoming digits as shown in the following table.
Station VM Feature Usage: Off
Digit Function
1 Play New message
2 Play Saved message
7 Set Cancel/Fwd, available only for remote access
8 Mailbox Setting, "Mailbox Settings" prompt
9 VM Long options
# Drop, "Goodbye”
0 Attendant Call, Call to System Attendant.