iPECS eMG80 - Intercom Tenancy Group

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
289
2.88 Web Call Back
Description
The Station User Web portal incorporates a Web Call Back feature. In the portal, you may be
permitted to request the system to establish a telephone call between two telephone numbers.
The call is subject to the dialing restrictions of the station number associated with the portal
access. An SMDR record is generated with the station number that accessed the portal identified.
Operation
1. Access your Station Web portal and select the Call Back menu (Set Enable in PGM 113 or
Common Attributes -> Routing attributes -> Web Call Back Service).
To activate web call back
2. Enter the “to” and “from” telephone numbers.
3. Press Call button. The page will update to indicate success or failure of the call.
Conditions
1. Web Call Back must be enabled in your Station’s attribute assignments.
2. You will receive an error message if any of the following occur:
 Call Back is disabled
 The outgoing call is restricted due to your COS
 No outside Line is available or
Programming
Keyset Admin.
STATION DATA
Web Call Back Service (PGM 113-Button 24-11)
STATION DATA
Web Admin.
Common Attributes Web Client Service
Related Features
Hardware