iPECS eMG80 - Door Open

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
111
Related Features
 Feature Cancel
 Intrusion
 Call Forward
 DND Override
 Executive/Secretary Forward
 Station Groups
 DND - One Time DND
Hardware
2.35 Door Open
Description
The iPECS hardware is equipped with relays that activate External Control Contacts. The
contacts can be assigned to one of several functions including a Door Open Contact. When used
as a Door Open Contact, the contact is connected to a door-lock release mechanism. When
assigned stations receive the Door Bell signal, the user may dial the Door Open code to activate
the contact.
iPECS IP and LDP Phones may be assigned a Flex button as a {DOOR OPEN} button.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + Door Open code (“#*1”~“#*4”) + [HOLD/SAVE]
To assign a {DOOR OPEN} button
1. Lift the handset or press the [SPEAKER] button.
To activate the relay contact
2. Dial the Door Open code, “#*1”and “#*2” (eMG) or “#*1” in UCP100 or “#*1”to “#*4” in
UCP600 and UCP2400.
3. Hang-up to return to idle.
Or,
1. Lift the handset or press the [SPEAKER].
2. Press the {DOOR OPEN} button.
3. Hang-up to return to idle.