iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
261
Conditions
1. Multi-line conference time is not applied on 3-party Net Conference.
2. A SIP phone cannot initiate a Net Conference.
Programming
Keyset Admin.
SYSTEM
Networking Basic Attribute (PGM 320)
Networking CO Line Attribute (PGM 322)
Network Numbering Plan Table (PGM 324)
Network Feature Code Table (PGM 325)
NETWORKING DATA
Web Admin.
Net Basic Attributes
Related Features
Multi-Party Conference
Hardware
2.82.2.7 Net Station Message Waiting
Description
When a called station does not answer or is in DND, you can activate a Station Message Wait
indication to request a Call Back. A station may receive a Message Wait from any number of
other stations in the system. The station receiving the Message Wait can return the calls using
the [MESSAGE/CALL BACK] button.
Operation
iPECS IP & LDP Phones
1. Press the [MESSAGE/CALL BACK] button, confirmation tone received.
To leave a Message Wait, while receiving ring back tone or no response on a call announce
2. Hang up, Message Wait activated.
1. Press the [MESSAGE/CALL BACK] button, confirmation tone received.
To leave a Message Wait, while receiving DND tone
2. Hang-up, Message Wait activated.
1. Press [MESSAGE/CALL BACK] button, the message contents summary as below or the
Station Messages Waiting list will display.
To retrieve Station Messages Waiting
To Next Page
Loading...
