iPECS eMG80 - Prepaid Call

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
198
2.62 Outside Call Redirect
Description
You can assign a Flex button of your iPECS IP or LDP Phone to send an incoming outside call to
a pre-defined destination such as the Attendant, Voice Mail, another Station, or Hunt group
without answering the call. Call Redirect acts as a one-time Call Forward.
Operation
[TRANS/PGM] + {FLEX} + [TRANS/PGM] + “58” + destination + [HOLD/SAVE]
To assign a Flex button for {Call Redirect}
iPECS IP & LDP Phones
1. Press the {Call Redirect} button; the call is redirected to the defined destination.
To activate Call Redirect while receiving an outside call
Conditions
1. Conditions associated with Call Forward apply.
2. Only the call ringing at the time Call redirect is activated will be redirected. The next
incoming outside call is routed as normal.
Programming
Related Features
Hardware
 iPECS IP or LDP Phone