iPECS eMG80 - Call Park

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
49
2.9 Automatic Pause Insertion
Description
The system will automatically pause when dialing a Speed Dial number to allow for potential
connection delays. The pause will be inserted when any of the following occurs:
 After a Flash is encountered in a Speed Dial number,
 After a PABX access code is encountered in a Speed Dial or redial number,
 After a Pulse to Tone Switchover is encountered in a Speed Dial or Redial number.
 When a connect message is received on an ISDN Line.
Operation
System
Conditions
The system automatically pauses dialing after an appropriate event.
1. An automatically inserted pause is not counted as a digit in a Speed Dial number.
2. The LCD of an iPECS IP or LDP Phone will show a "P" when a pause is encountered.
This indication is not shown if the system inserts the Pause automatically.
Programming
Keyset Admin.
SYSTEM
Pause Timer (PGM 181-Button 10)
SYSTEM DATA
Web Admin.
System Timers

Pause Timer
Related Features
 Station Speed Dial
 System Speed Dial
 Auto Called Number Redial (ACNR)
 LNR (Last Number Redial)
 Dial Pulse to Tone Switchover
Hardware