iPECS eMG80 - Page 61

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
48
ACNR Retry Count
Count determines the number of ti
mes system will attempt the call
before ACNR is automatically cancelled.
2. The call will be placed on the same outside Line as originally used. If the Line is busy,
an available Line in the same Line group will be seized.
3. The ACNR Retry Counter decrements by one when the system completes the dialed
number.
4. When the ACNR Pause Timer expires, if the station is in a busy state, the ACNR Delay
Timer is invoked.
5. Upon completion of dialing, the system will monitor the call for progress signals.
6. To preserve ACNR feature in activated state, SLT user does not go On-Hook.
7. While ACNR dialing or waiting state, if SLT user goes On-Hook, then SLT ACNR is
deactivated, automatically.
8. While ACNR is active for a SLT, the SLT user cannot receive or place a call.
Programming
Keyset Admin
SYSTEM
.
ACNR Delay Timer (PGM 180-Button 8)
ACNR Pause Timer (PGM 180-Button 9)
ACNR Retry Counter (PGM 180-Button 10)
ACNR Tone Detect Timer (PGM 180-Button 11)
NUMBERING
SLT ACNR Code (PGM 109-Button 18)
SYSTEM ID &
NUMBERING PLANS
Web Admin.
Flexible Numbering Plan SLT ACNR
SYSTEM DATA
System Timers ACNR Delay Timer, ACNR Pause Timer,
ACNR Retry Counter, ACNR Tone Detect Timer
Related Features
 LNR (Last Number Redial)
 Speakerphone
 Mute
Hardware
 iPECS IP or LDP Phone