iPECS eMG80 - Mark a Message for Delivery Confirmation

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
156
“For regular delivery, press 1. To mark urgent, press 2. To mark private, press 3. To
mark urgent and private, press 4. To request delivery receipt of the message for future,
press 5.”
2. Dial “3” or “4” for Urgent and Private, the message is sent as a private message and you
receive the “Your message has been sent”.
Conditions
1. You must be permitted to mark a message as Private as part of the VM COS
Programming
Keyset Admin.
SYSTEM
VM COS Attributes (PGM 253)
SYSTEM DATA
Web Admin.
VM COS Attributes
Related Features
 Send a Message
 Distribution Lists
Hardware
2.47.3.7 Mark a Message for Delivery Confirmation
Description
You can mark a message so that when the receiver listens to the message you are notified with a
confirmation Voice message.
Operation
1. After identifying the receiver, you will receive the send message options prompt
To mark a message for Delivery Confirmation
“For regular delivery, press 1 to mark urgent, press 2 to mark private, press 3 to mark
urgent and private, press 4 to request delivery receipt of the message for future, press 5.”
2. Dial “5”, the message is sent.
3. After the receiver listens to the message you receive a confirming Voice message with the
Mailbox number that received the message and the time the message was received
(listened to).
Conditions
1. You must be permitted to mark a message for Delivery Confirmation as part of the VM