iPECS eMG80 - IP Address Dialing

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
336
4.11 IP Address Dialing
Description
If allowed, you can place calls using an IP path. The system accepts user dialed digits as the IP
address for the called party. When dialing an IP call, the asterisk, “*”, is used as the “dot” between
bytes of the IP address.
Operation
iPECS IP & LDP Phones
1. Lift the handset or press the [SPEAKER] button.
To place an IP Call
2. Press the {IP Line Group} button or dial IP Group access code.
3. Dial “xxx * xxx * xxx * xxx”, use “*” as the dot in the IP address.
4. Press “#” to complete dialing.
SLT
1. Lift the handset.
To place an IP Call
2. Dial the IP Group access code.
3. Dial ‘xxx “*” xxx “*” xxx “*” xxx‘, use “*” as the dot in the IP address.
4. Press “#” to complete dialing.
Conditions
Programming
Keyset Admin.
STATION
CO/IP Group Access (PGM 117)
Direct IP Call (PGM 122-Button 1)
CO/IP
CO/VOIP Mode (PGM141-Button11)
STATION DATA
Web Admin.
CO/IP Group Access
Station IP Attributes

Direct IP Call
CO LINE DATA
VoIP Attributes
Related Features
Hardware
 IP Line