iPECS eMG80 - Dial Pulse Signaling

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
316
3.11 Paging
3.11.1 Internal/External & All Call Page
Description
If your station is permitted to access page facilities, you can connect and transmit voice
announcements to any or all of the systems Internal/External Page zones. Stations are grouped
into “zones” to receive pages to the zone. Stations not assigned to any zone will not receive
pages including All Call pages.
A page warning tone, if assigned, will be provided to the Page Zone(s) prior to the audio
connection. You may continue the page announcement for the specified Page Time-out after
which you will be disconnected and the Page Zone(s) returned to idle.
The default Page Zone dial codes are as follows:
Internal Page Zones *301~*335(eMG80) / *301~*400(eMG800/UCP)
Internal All Call Page
*543
External Page Zones *545
External Page Zones
*546 (Only UCP)
External All Call Page *548
All Call Page
*549
Flexible buttons of iPECS IP and LDP Phones may be assigned to access a Page Zone as a
{PAGE ZONE} button.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + Page Zone number + [HOLD/SAVE]
To assign a Flex button as a {PAGE ZONE} button
1. Lift the handset.
To make a page
2. Dial the desired paging code or press a {PAGE ZONE} button.
3. If assigned, after the Page Warning Tone, make announcement.
4. Replace the handset to return to idle.
1. Press the [MESSAGE/CALL BACK] button.
To queue for a page when busy is received
2. Replace the handset returning to idle.