iPECS eMG80 - Speed Dial; Display Security

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
218
2.75 Speed Dial
2.75.1 Display Security
Description
Station and System Speed Dial numbers may be programmed so that the telephone number
digits are not displayed on the LCD of iPECS IP and LDP Phones when the Speed Dial is
selected.
Operation
1. Dial “*” as the first digit of the Speed Dial number.
To assign Display Security to a Speed Dial number
Conditions
1. The number is displayed when programming the Speed Dial number.
2. Display Security does not affect the SMDR output.
3. Display Security is provided on all outside calls including calls that are transferred or
recall.
4. An “*” in any digit position other than the first, will activate Pulse to Tone Switchover.
Programming
Related Features
 Dial Pulse to Tone Switchover
 Speed Dial
Hardware