iPECS eMG80 - Intercom Caller Controlled Signaling

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
299
3.5 Intercom Caller Controlled Signaling
Description
You can change the signaling mode of an Intercom (ICM) call from Tone ring to Voice announce
or Voice announce to Tone ring.
Operation
iPECS IP & LDP Phones
1. Place your intercom call as normal.
To change the ICM Signaling mode
2. Dial “#”, the ICM Signaling mode will change from Voice announce to Tone ring or Tone
ring to Voice announce.
SLT
1. Place your intercom call as normal.
To change the ICM Signaling mode
2. Dial “#”, ICM Signaling mode will change from Voice announce to Tone ring or Tone ring to
Voice announce.
Conditions
1. The ICM Signaling mode cannot be changed when an Intercom call is placed to a
Linked Pair station. Such intercom calls always employ Tone signaling.
2. If the signaling mode is changed, the call is not subject to Call Forward, No Answer.
3. The signaling mode for a specific Intercom call can only be changed once and cannot
be changed back to the original signaling mode.
4. Changing the signaling mode does not affect privacy at the called station.
Programming
Keyset Admin.
STATION
Caller Controlled ICM Signaling (PGM 111-Button 15)
STATION DATA
Web Admin.
Common Attributes

Forced Hands-Free Answer
Related Features
 Intercom Signaling Mode
 Linked Station Pairs
Hardware
 iPECS IP or LDP Phone to receive Voice announced calls