iPECS eMG80 - Direct Station Selection;Busy Lamp Field (DSS;BLF)

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
295
3.2 Direct Station Selection/Busy Lamp Field (DSS/BLF)
Description
You can assign Flex buttons on iPECS IP and LDP Phones, or DSS Consoles to provide one-
button calling to another station and the button LED indicates the status of the station. The
{DSS/BLF} button can also be used for one-button transfer. The LED will illuminate when the
station is busy and flash when receiving a call. In addition, the DSS/BLF button will flash when
the associated station calls you.
Operation
[TRANS/PGM] + {FLEX} + Station number + [HOLD/SAVE]
To assign a Flex button for {DSS/BLF}
iPECS IP & LDP Phones
Conditions
Operation of this feature is automatic for assigned Flex buttons.
1. A station receiving ICM ringing is considered busy and the associated DSS/BLF LED
on all other stations will flash at 30 ipm.
2. A station receiving ICM ringing will receive visual indication by a flashing LED of the
Flex button associated with the calling station.
3. When a station receives a Camp-On the LED of a DSS/BLF button associated with the
calling station will flash.
4. The station is considered busy when in use, receiving ICM Ring at an iPECS IP or LDP
Phone, or receiving any ring at a SLT.
Programming
Related Features
 Intercom Call (ICM Call)
 Station User Programming & Codes
Hardware
 iPECS IP or LDP Phone