iPECS eMG80 - Page 307

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
294
2. This feature is only available for active calls; you cannot barge in on a ringing or held
call.
3. The Barge-In supervisor phone display will indicate the Id of the connected parties
prior to the Barge-in operation.
4. If ‘Privacy’ option is ON, then any person could not barge-in to the station.
Programming
Keyset Admin.
STATION
Barge In Mode (PGM 113 Button 24-7)
STATION DATA
Web Admin.
Common Attributes

Barge In Mode
Related Features
 Intrusion
Hardware
 iPECS IP or LDP Phones with 3-soft buttons