iPECS eMG80 - Introduction; Manual Application; Manual Organization; Feature Information

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
1
1. INTRODUCTION
1.1 Manual Application
This document provides detailed information covering description and operation of the
numerous features available in iPECS Release system software. The document is written
assuming the system employs the default-numbering plan 2.
1.2 Manual Organization
Features are arranged alphabetically in nine (9) different major groupings as follows:
 Section 1 Introduction
 Section 2 System Features
 Section 3 Intercom Features
 Section 4 CO/IP lines
 Section 5 iPECS IP & LDP Phones
 Section 6 Attendant
 Section 7 SLT
 Section 8 SIP Extension
 Section 9 iPECS UCS Client
 Section 10 DECT Multizone Support
1.3 Feature Information
Each section is an alphabetical listing of features with the description and operation of each.
The structure is divided into 6 parts as below:
 Description: explains the nature of the feature.
 Operation: gives detailed step-by-step operation of the feature for Ericsson-LG
Enterprise phones (LDP digital and LIP IP phones) and SLTs. In some cases a Flexible
button on the Ericsson-LG Enterprise phones can be assigned to activate the feature. In
this case, the user entries to assign the button are provided.
 Conditions: explains known feature interactions and constraints related to the feature.
 Programming: lists database entries that may be required for proper feature operation.
This lists are related to Station Admin programming on eMG Administration and
Programming manual. Regarding WEB admin, you directly access to the web admin and
check the programming.
 Related Features: lists related topical information to aid in understanding the feature.
 Hardware: lists hardware required for proper feature operation.