iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
266
2.82.2.9 CO Transit-In
Description
When a DID call is received by a networked system, the system will attempt normal DID call
routing. The ICLID table is examined, followed by the MSN table, then the defined DID number
conversion is completed. The system does a look-up in the Flexible DID Table to identify the
destination. If the number is a station in a networked system, the system routes the call to the
destination over the appropriate network connection with CLI provided to the called station.
Operation
Conditions
Operation of Distributed Networking is automatic when configured.
1. CO Transit-In calls are not subject to recall or time restrictions at the originating system.
2. If no path is available over the network, the caller will receive busy tone.
3. The system, which originally received the call, will generate two SMDR records for the
call, the original incoming call and the transit-call to the destination station.
Programming
Keyset Admin.
SYSTEM
Networking Basic Attribute (PGM 320)
Networking CO Line Attribute (PGM 322)
Network Numbering Plan Table (PGM 324)
Network Feature Code Table (PGM 325)
NETWORKING DATA
Web Admin.
Net Basic AttributesCNIP Enable, CONP Enable
Net Supplementary Attributes
Net CO Line Attributes
Related Features
Direct Inward Dialing (DID)
ICLID Call Routing
Multiple Subscriber Number (MSN)
Hardware
To Next Page
Loading...
