iPECS eMG80 - Page 277

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
264
Operation
iPECS IP & LDP Phones
1. Lift the handset or press the [SPEAKER] button to receive dial tone.
To activate Call Forward, (Unconditional, Busy, No Answer, or Busy/No Answer)
2. Press the [FWD] button or Soft key. For the LIP8002, the [DND] button is used to activate
Forward.
3. Dial desired Call Forward code (“1”~“4”).
4. Dial the station or station group to receive calls.
Or,
Dial an outside Line access code (9, 8xx, 88xx) and the desired external phone number.
Or,
Press the [SPEED] button and dial the desired bin number.
5. Replace the handset, return to idle.
1. Press flashing [FWD] button, Call Forward will deactivate and the [FWD] button LED is off.
To deactivate Call forward
Or,
For an iPECS IP Phone,
1. Lift the handset or press the [SPEAKER] button to receive dial-tone.
2. Press the [FWD] Soft button. For the LIP8002, the [DND] button is used to activate
Forward.
3. Press the # dial pad button.
SLT
1. Lift the handset to receive dial tone.
To activate Call Forward,(Unconditional, Busy, No Answer, or Busy/No Answer)
2. Dial “*554”, Call Forward code.
3. Dial desired Call Forward code (“1”~“4”).
4. Dial the destination station, station group, or dial CO access code (9, 8xx, 88xx) and
desired external phone number.
5. Momentarily press the hook-switch and receive confirmation tone.
6. Replace the handset to return to idle.
1. Lift the handset and receive stutter dial-tone.
To deactivate the Call forward
2. Dial “*554”, Call Forward code.
3. Dial “#” to cancel Call Forward.
Conditions
1. To use Call Forward, a station must be permitted to forward calls in the system
database.
2. Authorization codes are required for ‘Follow-me’ Call Forward and may be required to
activate Network Call Forward ‘Follow-Me’
3. A station is separately allowed Call Forward and Off-Net Call Forward.
4. The iPECS does not check the status of the receiving destination; once forward is