iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
363
06 – SLT MOH 3
07 – SLT MOH 4
08 – SLT MOH 5
09 – System Announcement MOH 2
10 – System Announcement MOH 3
4. Press [HOLD/SAVE] to save your selection.
Conditions
1. The speaker volume is adjustable at the station by using the [VOL UP]/[VOL DOWN]
buttons.
2. BGM is delayed 1 second after a return to idle state.
3. Silence is provided if no BGM source is assigned.
4. For remote devices, BGM must be locally provided; BGM is not sent from the eMG
system to remote devices.
5. System Announcement MOH 1 employs System announcement 201 and must be
recorded properly. System announcement MOH2 and MOH3 may use any unused
System announcement except for announcement 201 and 202. The announcement
number must be defined in the Music Sources program (PGM 171).
6. For SLT MOH, the SLT port must be connected properly and the station number of the
SLT port used for MOH must be assigned as the SLT MOH port.
Programming
Keyset Admin.
SYSTEM
BGM Type (PGM 171-Button 1)
Internal MOH Type (PGM 171-Button 3)
Assign SLT MOH Port (PGM 171-Button 4)
VSF MOH2 (PGM 171-Button 5)
VSF MOH3 (PGM 171-Button 6)
SYSTEM DATA
Web Admin.
Music Sources BGM Type, Internal Music Type, SLT MOH
Related Features
MOH (Music-On-Hold)
Internal/External & All Call Page
Hardware
An external music source properly connected to the KSU or UCP, refer to the
iPECS Hardwar Description and Installation Manual.
To Next Page
Loading...
