iPECS eMG80 - Page 114

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
101
3. Press the [HOLD/SAVE] button.
1. Press the [TRANS/PGM] button.
To restore the assigned COS (Class of Service)
2. Dial “22”, the restore COS (Class of Service) code.
3. Dial Authorization Code (station number and code).
4. Press the [HOLD/SAVE] button.
SLT
1. Momentarily press the hook-switch.
To activate Temporary COS (Class of Service)
2. Dial “*561”, the SLT Programming code.
3. Dial “21”, the Temp COS (Class of Service) code.
4. Momentarily press the hook-switch.
1. Momentarily press the hook-switch.
To restore the assigned COS (Class of Service)
2. Dial “*561”, the SLT Programming code.
3. Dial “22”, the restore COS (Class of Service) code.
4. Dial Authorization Code (station number and code).
5. Momentarily press the hook-switch.
System Attendant
1. Press the [TRANS/PGM] button.
To activate Temporary COS (Class of Service)
2. Dial “021”, the Temp COS (Class of Service) code.
3. Dial the Station range. If only one Station is to be assigned Temp COS, dial the Station
number twice.
4. Press the [HOLD/SAVE] button.
1. Press the [TRANS/PGM] button.
To restore the assigned COS (Class of Service)
2. Dial “022”, the restore COS (Class of Service) code.
3. Dial the Station range. If only one Station is to be assigned Temp COS, dial that Station
number twice.
4. Press the [HOLD/SAVE] button.
Conditions
1. When the COS of a Station is restored the Station COS (Class of Service) is changed
to the COS assigned for the active service mode, Day, Night, or Timed.