iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
129
2. Dial a Line access code, you will receive busy tone.
3. Make a Hook Flash.
4. Dial “*56*”.
5. The call on the busy Line is terminated, the connected station receives error tone and you
are connected to the Line.
Conditions
1. If the station was talking to other station or CO line, the call is disconnected when the
station receives forced Intrusion call.
2. A Forced Intrusion call is not possible to a station in DND state.
3. A Forced Intrusion call is not possible to an Attendant.
4. Any station with a Forced Intrusion button can activate this feature.
5. If ‘Privacy’ option is ON, then any person can’t intrude into my conversation by barge-in
and forcefully disconnect the feature.
Programming
Related Features
Hardware
To Next Page
Loading...
