iPECS eMG80 - Page 162

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
149
3. After recording prompt, say your name.
1. Dial the [Record VM Subscriber Name] flexible number.
To delete Company Directory Name
2. Dial 2 to delete the Name recording.
SLT
1. Dial “*563” the Company Directory Name record code flexible number.
To record a Company Directory Name
2. Dial 1, to record your Name.
3. After the recording prompt, say your Name.
1. Dial “*563”, the Company Directory Name record code.
To delete Company Directory Name
2. Dial 2 to delete the Name recording.
1. In response to the system announcement, the caller dials the Company Directory index.
To use Company Directory Feature
2. The system plays the First/Last name selection prompt.
3. The caller selects first or last name entry.
4. The system plays the enter 3-character prompt.
5. The caller dials the first three characters of the desired station user.
6. The System plays Name Greeting for each match (maximum 9).
7. If there is a single match, the called is transferred. If multiple matches exist, the system
plays prompts for each with a selection digits below:
“for [subscriber name], press 1”
“for [subscriber name], press 2”
…
“for [subscriber name], press 9”
8. When the caller enters the desired digit, the system routes the caller to that station.
Conditions
1. To be searched in company directory, the Station user name must be recorded and the
first and last name also must be programmed properly.
Programming
Keyset Admin.
STATION
VSF Access (PGM 113-Button 2)
Company Directory First Name (PGM 127-Button 5)
Company Directory Last Name (PGM 127-Button 6)
STATION DATA
Web Admin.
VM Attributes

VSF Access, Company Directory - First