iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
173
Operation
1. Press “8”, for Mailbox settings, the “Mailbox Setting” prompt is received.
To program Mailbox settings while “in” the Voice Mailbox
1. Dial “1” and receive the “Greeting Option” prompt (“To listen to your current greeting, press
five, To record a new greeting, press seven, To return to the main menu, press nine.”).
To edit your greeting
2. Dial “5”, to hear your current greeting.
3. Dial “7” to record a new greeting (“At the tone, record your new greeting, press # when you
have finished”.)
1. Dial “2” and receive the “Password Entry” prompt (“Please enter your new password and
press pound when finished.”).
To edit your password
2. Dial new password.
3. Press “#” and receive the “Reenter Password” prompt (“Please re-enter your password to
confirm and press pound when finished.”).
4. Dial new password again.
5. Press “#” and receive “Password Confirmation” prompt (“Your password is saved.”).
1. Dial “9” to return to the main VM menu.
To return to main menu
Conditions
1. If you are accessing your Voice Mail remotely, you must begin dialing within the CCR
Analysis time, if not the call is released.
2. If the dialed number is not recognized, the “Invalid Entry” prompt is played.
3. You must assign a password (Authentication code up to 12 digits) before access to the
mailbox will be allowed. Note that a greeting need not be recorded.
Programming
Related Features
Message Storage
Message Retrieval
Remote Message Retrieval
Message Retrieval Options
Hardware
To Next Page
Loading...
