iPECS eMG80 - Page 20

iPECS eMG80 & eMG800 & UCP
Feature Description and Operation Manual Issue 1.6
7
Programming
Keyset Admin.
SYSTEM
Alarm Enable (PGM 163-Button 1)
Alarm Contact Type (PGM 163-Button 2)
Alarm/Doorbell Mode (PGM 163-Button 3)
Alarm Signal Mode (PGM 163-Button 4)
STATION
Alarm/Door Bell Attribute (PGM 113-Button 8)
SYSTEM DATA
Web Admin.
Alarm Attributes Alarm Enable, Alarm Contact Type,
Alarm/Doorbell Mode, Alarm Signal Mode
STATION DATA
Common Attributes

Alarm/Door Bell Attribute
Related Features
 Door Open
 Station Flexible Buttons
 System Alarm Notification Control
 Cabinet Alarm for UCP
Hardware
 iPECS IP or LDP Phone
 Alarm or Doorbell input contact, refer to Hardware Description & Installation
Manual to install.